< Knowledge

What is IoT?

“An internet of things (IoT) is a network of physical objects. These objects are equipped with built-in technology that measures or controls and communicates what is happening in or around the objects. 

That is roughly the definition of IoT research agency Gartner. According to them, IoT is a large network of physical things and connected locations. All kinds of information about those “things” is circulated in this network. These “things” can also be controlled remotely through this network. Well-known examples of IoT solutions are smart home solutions such as smart lighting in your living room and asset trackers, with which items can be easily found.


IoT has been on the rise for several years. This is because in many situations it is useful to know where your belongings are and how they are doing. Other advantages of IoT are that processes can be controlled and optimized remotely.


With the help of IoT you know:

  • What the status of your assets is
  • What is the context of your assets?
  • The location and location history of your assets
Multisensor Maintenance_Asset tracking iot

Figure 1. IoT provides insight into the status and location of assets and their context

In this article we explain in detail what an IoT solution is and how it can lead to optimizing processes. 

NB Because at Dent we mainly focus on IoT for business processes, we often use the word asset to indicate items, devices and locations.

Developments behind IoT

The internet has been around for a while, so what makes IoT a thing of recent years?

Due to the rapid development of technology and production methods, hardware costs (sensors, chips, batteries, etc.) have fallen sharply. The development and rollout of new networks worldwide ensures better connectivity, also in more remote locations. These networks are subject to worldwide standards. The quality of the network and the introduction of standards lowers the barrier to connecting “things” to the internet. On the one hand, the increasingly faster computing power of computers and microcontrollers ensures more valuable and efficient data processing. On the other hand, this can be done on an increasingly smaller scale with more and more computing power. The physical dimensions of the computing chips are therefore becoming smaller and smaller. This makes the battery the largest part of an IoT sensor and the whole can be smaller than a box of matches (image 2)

Thanks to developments in the last 15 years, we are today able to install more IoT solutions in places where this was not possible before. Due to the increasingly stronger and faster hardware and the large number of available networks, IoT solutions are becoming smaller, reliable and most importantly: affordable. More IoT connected assets leads to more information about assets and processes and therefore to better and more accurate decisions and less waste.

Dent IoT_Mini multisensor lokatie tracking

Figure 2: IoT sensors are becoming smaller and smaller, such as those developed by Dent IoT Mini Multisensor

Components of an IoT solution

Every IoT solution consists of a number of components. Multiple IoT solutions together create an internet of things. The core of many IoT solutions is the sensor. The sensor measure using the chip data, for example whether a trash bin is full. This data is then sent via a network sent to an online environment, a platform. Here the data is collected and processed into executable actions for administrators and users of the system. Finally, automated links are created using APIs (Application programming interface) with external systems for monitoring new information.

A. The IoT sensor

The core of many IoT solutions is the sensor. A sensor can be explained as a small piece of hardware that works as an artificial sense. Sensors measure, for example, temperature, sound or movement. Multiple sensors are often used per IoT solution. Combining sensor data (also called sensor fusion) provides a more complete and reliable overview of assets. The sensor uses small amounts of current to measure something about itself or the environment. 

The number of sensors and their availability has increased significantly in recent years and they are available in different price ranges. Due to the enormous range, it is almost always possible to find a sensor to gain the insight you are looking for. This ranges from measuring stress to measuring the tilt of buildings, for example. 

There is not one perfect sensor for every situation. It is therefore important to also measure “smartly” with a “smart sensor”. Smart measuring is merging knowledge about the context with the measured data. It is important to clearly understand the context of an asset and the associated process so that you know what to measure. Close collaboration with asset managers is of great value. A noise measurement in itself does not say anything, but when the noise levels exceed a certain value, this can mean that a machine is no longer functioning properly. A sensor can measure the temperature and also determine whether there is a temperature variation. But the speed of this change may say something about the status of your asset. Linking multiple measurements and drawing conclusions from them also ensures smart measuring. You can see an example of a sensor in Figure 3.

Dent IoT sensor Ultrasoon

Image 3: Ultrasonic sensor in casing, used to measure the filling level of waste bins

B. The Chip of the IoT sensor

A microcontroller, also called the chip or processor, is used to read the IoT sensors. The microcontroller is the brain of the smart sensor. Sensors are continuously read by the microcontroller. How the smart sensor measures is described in the piece of software that runs on the microcontroller. Figure four shows the microcontroller of a sound sensor.

Because the microcontroller is a simplified small computer, it does not need to consume much energy. This means that only small batteries are needed, so the smart sensor can last for several years. This of course depends on how often the microcontroller performs and sends a measurement. 

IoT chip

Figure 4: Circuit board of a sound sensor, with the microcontroller in the middle

Dent IoT Zendmast

Figure 5: Transmission tower for wide area networks

C. The IoT connection

The microcontroller connects to the internet via the communication module of the IoT sensor. This is done according to a defined set of agreements, also called a protocol. The range of different connections and protocols is constantly growing. Think of wireless connections such as WiFi, Bluetooth, 3G, 4G and 5G, but also GNSS (GPS), LoRa, LTE cat-M or NB-IoT.

Each protocol has its own advantages: for example, 5G is good for low latency, (very) high data speed, but only in specific areas. On the other hand, there is LoRaWAN, which is suitable for sending sensor data to the internet with very low energy consumption (ultra low power).

Dent IoT works extensively with Bluetooth or BLE (Bluetooth low energy) and wide area networks (image 5) such as LTE cat-M and LoRa and/or LoRaWAN.  Due to the wide range of protocols, assets can be connected to the internet more and more easily and affordably. 

Dent's expertise:
Energy-efficient IoT sensors

Many IoT sensors run on a battery. So you want to make the best possible use of your energy, so that you can benefit from the smart sensor and its measurements for as long as possible. The hardware made by Dent is therefore designed for ultra low power operation. You use deep sleep functionalities and smarts to only perform functions when strictly necessary. This means your battery can last for years. 

D. IoT platforms

When all smart sensors in an IoT solution measure and generate and send data, this data must be made visible to the end user somewhere. This happens on an online platform. On an IoT platform you want to do roughly 3 things that a computer is quite good at:

  1. Automated data tracking: By storing data you can perform analyzes at any time. This way you create a digital logbook. 
  2. Automated processing of data: With this logbook you can perform clear and structured analyses, discover trends and compare data sets. It starts with a simple “if this and that” and grows into a far-reaching variation on this. 
  3. Organizing data, devices and users: By creating a structured overview you can quickly access the right data or devices. In addition, it is valuable to make specific data transparent for specific users in order to be able to draw conclusions more quickly. This includes account and role based access, multi-tenancy, data lakes and device hubs. 

In figure 6 you will find a number of different IoT platforms.

Multisensor platforms_Grafana AWS Thingworkx Cumulocity IoT

Figure 6: IoT sensor data becomes visible on an IoT platform

E. API (application programmable interface) – the link between IoT platforms

As the final step of the IoT solution, it is important to have the right actions carried out based on the collected insights. Many companies already have systems that they use to manage their processes, such as Cumulocity IoT, WATSON IoT, Microsoft Azure IoT Hub or WithTheGrid. Every IoT platform can be linked to external systems. This allows notifications and work orders to be automatically sent to those who need the data. See Figure 7 for a schematic overview. 

API uitleg IoT Platform

Figure 7: The API (Application Programming Interface) ensures communication between the IoT platform used and your company's systems

Process optimization with IoT

Companies that start working with IoT are automatically working on process optimization. The smart sensors wirelessly and continuously monitor the most important process steps so that they can be followed digitally. Thanks to these insights, assets can be managed professionally and structurally. This can be categorized into 4 important aspects:

  • Location. Always know where an asset is, so you can use it when you need it. This will cause you unnecessary loss
  • Status. Always know what status an asset is in, especially the status before and after. Then you will never be disappointed and you can be sure that you can use the object
  • Management. So that you don't have to be everywhere when you want to use something. Assets can be enabled or disabled remotely. This is close to robotization of assets.
  • Efficiency. Because all data regarding use and consumption is known, optimization can be done (for example figure 8). This makes services such as Just in Time delivery, shared use and predictive maintenance possible.

Thanks to the smart sensor and the IoT platform, asset managers can easily manage all their assets from a performance-oriented environment. This saves time and money and therefore optimizes it.

Multisensor Inspection_Asset tracking iot

Figure 8: An example of business process optimization using IoT. The inspector only needs to inspect the assets that indicate an error.

Conclusion

Within every organization there is a desire for optimization. Many companies are built on and around outdated technology. As soon as these companies decide to digitize, a world of possibilities opens up. IoT offers concrete solutions that allow companies to digitize the important aspects of their business. This way they can work pragmatically and develop their so-called digital twin piece by piece. Dent helps companies in this entire process, from the first brainstorm to the installation of the last sensor.

Follow the developments of Dent IoT

Subscribe to the newsletter and receive an email every month with new knowledge and developments from Dent IoT







To ask? Contact Niels!

Niels Stamhuis

+31 10 – 333 04 61
niels@dentiot.com

Multisensor: A blueprint for speed

In many Dent IoT Engineering projects we use Multisensor as a starting point, also for creating customized solutions. With its 7 different sensors, LoRa and Bluetooth, Multisensor ensures that most IoT cases can be realized. Additional required sensors can be easily attached, and additional pieces of code can be easily uploaded, so that even complicated challenges can be tackled quickly. Knowing more? Contact us!

Please contact usMore about Multisensor